OpenOffice.org Forum at OOoForum.orgThe OpenOffice.org Forum
 
 [Home]   [FAQ]   [Search]   [Memberlist]   [Usergroups]   [Register
 [Profile]   [Log in to check your private messages]   [Log in

Saving files to 1.44 floppies in OpenOffice Writer

 
Post new topic   Reply to topic    OOoForum.org Forum Index -> OpenOffice.org Writer
View previous topic :: View next topic  
Author Message
sluggingaway
Newbie
Newbie


Joined: 04 Nov 2007
Posts: 3

PostPosted: Mon Jun 16, 2008 9:16 am    Post subject: Saving files to 1.44 floppies in OpenOffice Writer Reply with quote

I wonder whether anyone can help me with saving files to 1.44 floppies in OpenOffice. I have changed settings and conducted quite a few experiments to see where the problem lies.

In the following attempts, I was successful, taking roughly 10 seconds:
in OpenOffice for Windows in Windows XP;
in Abiword;
in Kword;
a file copied in shell to floppy;
a simple file in OpenOffice given "text" format (less than 10 seconds);
a simple file in OpenOffice given "rich text format:" (less than 10 seconds);

I "converted-and-saved" a file to MS Word format onto a floppy formatted with ext2 in 31 sec (I converted to the /Home/My Documents directory in roughly 4 seconds; that means the save itself probably took 27 seconds and the conversion 4 seconds).

At first a file in Open Document Text could not be saved to floppy.
With my latest version of OpenOffice (2.0.4) I would get two error messages: "Error saving the document Untitled1: /media/floppy/tryagain.odt does not exist." and "Error saving the document tryagain.odt: General Error. General input/output error."
An attempt with OpenOffice 2.4 had the same result.

(In an earlier version of OpenOffice [2.0-pre] the floppy drive would labour noisily for roughly 3 minutes. I forget what the outcome was. I think it didn't copy the file or didn't copy it till sometime later. Basically I think this operation was erratic or unsuccessful.)

My latest experiments involved selecting the following settings:
I gave Owner, Group, and Others rwx permissions for /dev/fd0, /media/ and /media/floppy.
I made the "Save To" default format in OpenOffice "Options" menu /media/floppy.
I did a low-level format on the floppy with fdformat (unnecessarily?), then did mke2fs to create a ext2 filesystem layout.
And of course I mounted the /media/floppy filesystem.
The filesystem type in fstab was auto. The options were: rw (noauto--this one didn't show up with "mount" command), noexec, nosuid, nodev, user, sinc, 0, 0.

Then OpenOffice still took maybe 2 minutes with a lot of fast two-stroke chirping sounds to copy the file to the floppy, though this time there was no error message and the file did ultimately show up on the floppy.

(I am using SuSE 10.2. I have a Dell OptiPlex GX1 Pentium II, CPU: 667; RAM: 512 MB; Hard Drive: 80 GB.) The first round of experiments two or so years ago were with SuSE 10.0 and OpenOffice 2.0-pre.

The conclusion to be drawn here seems to be that there is something drastically wrong with the OpenOffice programming in this feature.

People need to be able to save files to 1.44 floppies. These floppies are cheap, maybe 40 cents each. You save only a file or so to each. If your computer breaks down, you can take such a floppy out and continue your work somewhere else. If you lose or damage the floppy, you don't lose your life's work.
If there is an electrical storm in the vicinity, you should be able to save a file to a 1.44 floppy quickly and easily.
There are problems with USB drives, apart from their cost.

By the way, what's the difference between Linux low-level formatting and DOS low-level formatting? None, right?

Will OpenOffice only recognize a ReiserFS filesystem for an Open Document file, is that it?

Well, I certainly will be interested in hearing from someone who knows the answer to this problem, if there is one.
Back to top
View user's profile Send private message
JJJoseph
Power User
Power User


Joined: 25 Sep 2005
Posts: 81

PostPosted: Sat Jul 19, 2008 5:00 pm    Post subject: Saving to floppy Reply with quote

There's now lots of easier faster cheaper backups than floppies. A cheap USB stick can hold 1000 floppies worth of data for example. But, that said, your Linux floppy format may be different from your DOS floppy format. There's a dozen options for each (tracks, sectors,single-side, 2-side,etc); it's possible that you've not matched the formats. Insert a floppy with data into your machine to see if your machine can see and read the floppy. If so, then try writing a small file to that same floppy.

That's all the insight I can offer at this time.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    OOoForum.org Forum Index -> OpenOffice.org Writer All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group