Joined: 27 Sep 2005
|Posted: Thu Aug 28, 2008 5:00 am Post subject: Print Avery Zweckform labels 3325
|I don't have the template for 3325 Zweckform Avery labels and I couldn't find it online so I created it myself. After much trial and error I came up with a satisfactory (though not perfect) result. I'm posting the numbers here, it may save time to others in similar situation, and if anyone has a better solution please speak up!
The sheet is 12.5x15.7 cm
There are 3 columns and 6 rows
Labels are 3.8x2.4 cm
For the template I used:
H pitch: 4.05
V pitch: 2.62
L margin: 0.1
T margin: 0.1
I had to use Borderless option (TurboPrint Pro on linux) for printing because Normal mode always shifted everything away from the paper (sheet) edges.
Is there a way to print the labels without Borderless option (the labels are 1mm from the sheet edges)? I set the margins to 0.1cm but in Normal print mode its never below 3.5mm.
I guess this might be a printer issue, maybe using something else than plain paper would make it possible to use the set margins even in normal print mode?
It's turtles all the way down!